Rod End For Hydraulic 30Mm Eye Steel On Steel Right Hand Thread M22X1.5Mm

Description:
Rod ends for Hydraulic components is made up of a rod end and a radial spherical plain bearing, the bearing is fixed in housing by snap rings. There are two kinds of rod end: rod end with welding shank and rod end with locking slot. The material of the rod end with welding shank is weldable steel. The rod end shank has two kinds od shape, one is prismatic and another is cylindrical. At the bottom of the cylindrical shank, there is elastic pin which is easy for location.
Normally, the material of the rod end with locking slot is carbon steel or spheroidal graphite cast iron. The thread of the rod end body is female and equipped with screw for fastening. The hydraulic rod ends can be re-lubricated by the oil cup or through the hole of the rod end body.
Rod ends for hydraulic components (steel to steel) have good wear resistance. Normally, hydraulic rod ends need periodic re-lubrication. The high strength of the sliding surfaces makes these bearings especially suitable for bearing arrangements where heavy loads of alternating direction, or heavy static loads have to be accommodated.